Abstract
A thermal camera was used to measure surface temperatures during laser skin welding to provide feedback for optimization of the laser parameters. Two-cm-long, full-thickness incisions were made in guinea pig skin. India ink was used as an absorber. Continuous-wave, 1.06-μm, Nd:YAG laser radiation was scanned over the incisions, producing a pulse duration of approximately 100 ms. Cooling durations between scans of 1.6, 4.0, and 8.0 s were studied with total operation times of 3, 5, and 10 min, respectively. A laser spot diameter of 5 mm was used with the power constant at 10 W. Thermal images were obtained at 30 frames per second with a thermal camera detecting 3-5 μm radiation. Surface temperatures were recorded at 0, 1, and 6 mm from the center line of the incision. Cooling durations between scans of 1.6 s and 4.0 s in vitro resulted in temperatures at the weld site remaining above approximately 65 °C for prolonged periods of time. Cooling durations between scans as long as 8.0 s were sufficient both in vitro and in vivo to prevent a significant rise in baseline temperatures at the weld site over time.
| Original language | English (US) |
|---|---|
| Title of host publication | Proceedings of SPIE - The International Society for Optical Engineering |
| Publisher | Society of Photo-Optical Instrumentation Engineers |
| Pages | 120-127 |
| Number of pages | 8 |
| Volume | 3590 |
| State | Published - 1999 |
| Event | Proceedings of the 1999 Lasers in Surgery: Advanced Characterization, Therapeutics, and Systems IX - San Jose, CA, USA Duration: Jan 23 1999 → Jan 24 1999 |
Other
| Other | Proceedings of the 1999 Lasers in Surgery: Advanced Characterization, Therapeutics, and Systems IX |
|---|---|
| City | San Jose, CA, USA |
| Period | 1/23/99 → 1/24/99 |
ASJC Scopus subject areas
- Electrical and Electronic Engineering
- Condensed Matter Physics