Spatio-Temporal dynamics of turbulent separation bubbles

The spatio-Temporal dynamics of separation bubbles induced to form in a fully developed turbulent boundary layer (with Reynolds number based on momentum thickness of the boundary layer of 490) over a flat plate is studied via direct numerical simulations. Two different separation bubbles are examined: one induced by a suction-blowing velocity profile on the top boundary and the other by a suction-only velocity profile. The latter condition allows reattachment to occur without an externally imposed favourable pressure gradient and leads to a separation bubble more representative of those occurring over airfoils and in diffusers. The suction-only separation bubble exhibits a range of clearly distinguishable modes, including a high-frequency mode and a low-frequency 'breathing' mode that has been observed in some previous experiments. The high-frequency mode is well characterized by classical frequency scalings for a plane mixing layer and is associated with the formation and shedding of spanwise-oriented vortex rollers. The topology associated with the low-frequency motion is revealed by applying dynamic mode decomposition to the data from the simulations and is shown to be dominated by highly elongated structures in the streamwise direction. The possibility of Görtler instability induced by the streamwise curvature on the upstream end of the separation bubble as the underlying mechanism for these structures and the associated low frequency is explored.