TY - JOUR
T1 - Composite-Scattering Plasmonic Nanoprobes for Label-Free, Quantitative Biomolecular Sensing
AU - Zhang, Chi
AU - Paria, Debadrita
AU - Semancik, Steve
AU - Barman, Ishan
N1 - Funding Information:
C.Z. and D.P. contributed equally to this work. This work was supported by a grant from the National Institute of Standards and Technology (Grant No. 70NANB17H333). I.B. acknowledges support from the National Institute of Biomedical Imaging and Bioengineering (Grant No. 2-P41-EB015871-31), the National Institute of General Medical Sciences (Grant No. DP2GM128198), and the JHU Catalyst Award. I.B. would also like to acknowledge Bruker (Nano Surfaces Division) for the s-SNOM image. The authors also acknowledge technical support from the Center for Nanoscale Science and Technology's Nanofab at NIST. All vendors referred to in the Experimental Section are identified only to specify experimental procedure. The mention in no way implies recommendation or endorsement by the National Institute of Standards and Technology.
Publisher Copyright:
© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
PY - 2019/9/1
Y1 - 2019/9/1
N2 - Biosensing based on localized surface plasmon resonance (LSPR) relies on concentrating light to a nanometeric spot and leads to a highly enhanced electromagnetic field near the metal nanostructure. Here, a design of plasmonic nanostructures based on rationally structured metal–dielectric combinations is presented, called composite scattering probes (CSPs), to generate an integrated multimodal biosensing platform featuring LSPR and surface-enhanced Raman spectroscopy (SERS). Specifically, CSP configurations are proposed, which have several prominent resonance peaks enabling higher tunability and sensitivity for self-referenced multiplexed analyte sensing. Using electron-beam evaporation and thermal dewetting, large-area, uniform, and tunable CSPs are fabricated, which are suitable for label-free LSPR and SERS measurements. The CSP prototypes are used to demonstrate refractive index sensing and molecular analysis using albumin as a model analyte. By using partial least squares on recorded absorption profiles, differentiation of subtle changes in refractive index (as low as 0.001) in the CSP milieu is demonstrated. Additionally, CSPs facilitate complementary untargeted plasmon-enhanced Raman measurements from the sample's compositional contributors. With further refinement, it is envisioned that the method may lead to a sensitive, versatile, and tunable platform for quantitative concentration determination and molecular fingerprinting, particularly where limited a priori information of the sample is available.
AB - Biosensing based on localized surface plasmon resonance (LSPR) relies on concentrating light to a nanometeric spot and leads to a highly enhanced electromagnetic field near the metal nanostructure. Here, a design of plasmonic nanostructures based on rationally structured metal–dielectric combinations is presented, called composite scattering probes (CSPs), to generate an integrated multimodal biosensing platform featuring LSPR and surface-enhanced Raman spectroscopy (SERS). Specifically, CSP configurations are proposed, which have several prominent resonance peaks enabling higher tunability and sensitivity for self-referenced multiplexed analyte sensing. Using electron-beam evaporation and thermal dewetting, large-area, uniform, and tunable CSPs are fabricated, which are suitable for label-free LSPR and SERS measurements. The CSP prototypes are used to demonstrate refractive index sensing and molecular analysis using albumin as a model analyte. By using partial least squares on recorded absorption profiles, differentiation of subtle changes in refractive index (as low as 0.001) in the CSP milieu is demonstrated. Additionally, CSPs facilitate complementary untargeted plasmon-enhanced Raman measurements from the sample's compositional contributors. With further refinement, it is envisioned that the method may lead to a sensitive, versatile, and tunable platform for quantitative concentration determination and molecular fingerprinting, particularly where limited a priori information of the sample is available.
KW - finite element method
KW - microfabrication
KW - plasmonics
KW - Raman spectroscopy
KW - refractive index sensing
UR - http://www.scopus.com/inward/record.url?scp=85070504650&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85070504650&partnerID=8YFLogxK
U2 - 10.1002/smll.201901165
DO - 10.1002/smll.201901165
M3 - Article
C2 - 31394029
AN - SCOPUS:85070504650
SN - 1613-6810
VL - 15
JO - Small
JF - Small
IS - 38
M1 - 1901165
ER -